| 1) WEP Password. If you are using WEP encryption on
your network, you have two choices, WEP Password, or WEP hex or
ASCII. Notice the little bar at the top that says “WEP
Password” with an arrow next to it. If you are entering the
Hexadecimal code for your WEP network, you need to toggle it to
“WEP Hex or ASCII”.
2) WEP Hexadecimal Password part 2. Another problem I had, even
with the above toggle was it still would not take my code. If you
are still having this problem, preface your code with a “$” so
you might enter: “$D0EBDEED2101555CF5123AEB56A” This worked
for me.
3) WIFI Still Not Working? This was me. My WIFI was still not
working. My phone would only use the EDGE network.
A) Remove yourself from your Network. Go into your network
and select “Forget This Network.”
B) Turn WIFI Off. From them Settings Menu for WIFI, you
need to toggle the Blue On Button to the Grey Off Position.
C) Reset/Reboot your Wireless Router. Wait for your Router
to fully reboot.
D) Turn WIFI back on, on your iPhone.
E) Re-Connect to your WIFI Network. Re-enter your
encryption information as needed.
|
